Hunting is able to offer unique benefits to the Thru-Tubing industry, providing advanced solutions for a wide range of Workover & Coiled Tubing interventions direct to service providers and operators alike.
Through examining customer needs, Hunting has provided many innovative and technical solutions such as the WellGripp Connector, designed to grip and seal on the outside diameter of coiled tubing. The spiral design of the slip spreads the radial load produced by axial loading, resulting in a connector with greater strength than conventional connectors and improved operating parameters.
With a proactive approach to the ever-increasing market demand for well-engineered solutions for on and offshore operations, Hunting does not merely provide tools & hardware.
This success has been built around knowledge of the industry, correct planning, reliability of the equipment and ability to react to client requirements through timely engineering service and teamwork.
The Spoolable Connector with one-piece design provides a robust, cost effective means of joining two sections of coil. They are available in both dimple-on and roll-on styles.
The Slip Type Connector is an external type connector that engages the outer diameter of the coil tubing. The slip ensures that axial load is transferred into the tubing, increasing the strength of the connector grip on the tubing.
The Roll-On Connector with one-piece design provides a robust, cost effective means of attaching a BHA to the coil.
The WellGripp? Connector grips and seals on the outer diameter of coiled tubing, enabling the attachment of tools for coiled tubing operations.
The Dimple-On Connector is a one-piece design providing a robust, cost effective means of attaching a BHA to the coil.
The Motorhead Assembly is a compact tool string that incorporates a variety of
The Dual Flapper Check Valve provides a means of adding a uni-directional barrier to a BHA. The flappers provide a pressure-tight barrier in one direction, while enabling flow in the opposite direction.
The Hunting Back Pressure Valve enables the operator to keep a predetermined column of fluid in the tubing string irrespective of hydrostatic pressures.
The Heavy Duty Disconnect is a torque through disconnect that is released via a drop ball and hydraulic pressure. This tool enables the operator to drop a ball and pressure-up in order to disengage from a stuck fish or BHA.
The Hunting Drilling Disconnect is a robust, torque through disconnect that is released via a drop ball and hydraulic pressure. Read more
The Dual Circulating Sub is designed as a circulating safety component within the BHA. The design features a Shear-Out Ball Seat coupled with a Burst Disc.
The Hunting Annular circulation sub is run above a BHA and creates a flow path from the tubing into the annulus above so that fluid can be circulated above the tool string while running in hole. Read more
Hunting has developed a Flow Diversion Tool that can be run into the well to improve and enhance wellbore cleanout efficiency during intervention.?
The Torque Thru Quick Connector is a self-aligning tool string connector, capable of withstanding high degrees of torque in both directions. It eliminates the problems of connecting the coiled tubing when there is no means of rotating either the tubing or the BHA.
The Torque Thru Knuckle Joint provides a full 15-degree angular deviation and internal pressure sealing throughout the full deviation of the tool. The ball and socket of the knuckle have keys that prevent rotation, while still allowing full angular movement.
The Pump Thru Swivel is a standard tool string component which when used, permits full rotation of the BHA made up below the joint.
The Hunting Downhole Filter is a simple tool that is run above any debris intolerant tool to ensure full operability.
The Sleeve Stabiliser is used to centralise the coiled tubing BHA at points within the wellbore where problems of centralisation are paramount.
The Bull Nose Jetting Nozzles are available in single or multiport designs.
The Variable Jetting Nozzle is a multi-ported sub for clean out, scale removal and other such jetting operations.
The Spincat family of tools provides a simple, self-rotating high-pressure jetting action for downhole tubulars. Maximised jet power is delivered to the tubing walls by rotational speed controlled by the viscous fluid governor. By using only a few rotating jets, this results in hard-hitting power.
The WellDrill? Downhole Motor incorporates industry leading power and bearing sections. Using specifically selected components based on realtime merit, this positive displacement motor produces optimum reliability and power output, with maximum efficiency for today’s Well Intervention thru tubing demands.
We can design and supply various types of crushed carbide, carbide insert dressed, diamond impregnated and PDC type.
Hunting can supply a full range of Mills for all thru-tubing applications, including a variety of operations.
The WellDrill? Tri-Reamer is a hydraulically actuated underreamer used for removing scale or cement from the wellbore beneath a restriction.
The Hydraulic Anchor is primarily a device for anchoring bottom hole assemblies within tubulars.
The Lead Impression Block is used to identify fishing necks and debris during coiled tubing fishing operations.
The Wireline Spear is a tool that is used to fish broken wire from the tubing.
The Flow Release Overshot provides a means of engaging, locating and pulling on plain end fish or damaged external fishing necks.
To engage the fish, simply set down weight allowing the slip to collapse into the bore. When an overpull is applied, the slips will take hold of the fish.
The Bi-Directional Shifting Tool is a device used to selectively open or close sliding sleeves. The tool can be fitted with bi-directional dogs, allowing the operator to shift the sleeve in either direction, in a single run.
The Flow Activated Tubing End Locator is a device used for the location of nipple profiles and/or the end of the production tubing for depth correlation.
The Mechanical Tubing End Locator is a device used for location of nipple profiles and/or the end of the production tubing, for depth correlation. The design incorporates an emergency shear mechanism.
The External Heavy Duty Pulling Tool is a cost effective means of engaging, locating and pulling on standard, external fishing necks.
The Flow Release GS Pulling Tool is a cost effective means of engaging, locating and pulling on standard internal fishing necks.
The Stabbing Pulley is a lightweight device used in conjunction with a winch and wire system to safely feed the coil tubing from the reel to the injector head.
The Quick Stabbing Tool is a device used in conjunction with a winch and the Stabbing Pulley, to manipulate and safely feed the coil from the reel, and into the injector head.
The Surface Handling Tool is a device used in conjunction with a winch and the Stabbing Pulley for manipulating and safely, feeding the coil from the reel, and into the injector head.
The Tubing Clamp is a device used for securing coiled tubing, while being fed off of the reel.
The Direct Pressure Firing Head is designed for well conditions that are not favorable for dropping a detonating bar or where a backup pressure firing head is desirable.